New AVM Systech Private Limited

Spin Flash Dryer is widely used in the industry for converting Wet Cake material to powder, . The advantages of Flash drying  system are consistent product quality, with better control of product parameters like product moisture, bulk density, particle size etc. AVM offers Customized Flash Drying Systems with a variety of Configurations.Specifications: Capacity: 100 kg/h to 10,000 kg/h water evaporation. Max Inlet Temperature: Upto 1400 deg C The combination of Systems Configurations:Cage Mill / Feed Disperser / Agitated Spin Flash type dryer for drying of Food, Pharma, Starch, Agro, Chemical products. The wet  cake from centrifuge / Filter Press / Decanter is to be fed into the Dryer feed bin. The wet feed material comes in contact with hot drying air and travels through  drying duct and gets dried. The dried material gets conveyed to cyclone separator & discharged through rotary airlock valve.  

Spray Drying technology is widely used in the industry for converting liquid solutions/ suspensions/ slurry /emulsions to powder, granules or agglomerates. The advantages of spray drying are consistent product quality, with better control of product parameters like product moisture, bulk density, particle size, dispersion, flowability etc. AVM offers Customized Spray Drying Systems with a variety of Configurations.Specifications: Capacity: 75 kg/h to 10,000 kg/h water evaporation. Max Temperature: Upto 1400 deg CAir Flow Pattern Configurations: Co- current. Counter-current. Mixed flow.The

In Agitated Swirl Flash Dryers, the wet feed is fed into the dryer housing by suitable feeding mechanism above the rotating swirl agitator. The hot air/gas stream is also admitted in the drying duct through a specially designed distributor, admitting the air in swirling fashion. The material remains in agitated bed dried material gets carried forward separated in the Cyclones or bag filters. Some applications require preconditioning of feed by back-mixing of dry product. AVM offers Customized Agitated Swirl Flash Drying Systems with a variety of Configurations.

Material Feeding Configurations:

• Mono Screw Feeder
• Double Screw Feeder.
• Double Paddle Mixer for back mixing of dry product.
• Feed Bin with Lump Breaker.
• Volumetric feeder.
• Rotary Feeder.
• Specially design double shaft feeder followed by a mono screw.
• Positive Displacement Screw Pump for Viscous liquid / Pastes.

Particle Classifier Options:

• Orifice Classifier.
• Rotary particle Classifier.

Air Heating System Configurations:

• Direct Fired / Indirect Fired Air Heaters: using Liquid / Gaseous Fuels.
• Direct / Indirect Fired Air Heaters: using Solid Fuels, Agro Waste, Saw Dust, Rice Husk, Coal, Briquette etc.
• Indirect Air Heaters: Using Steam / Hot Oil / Thermic Fluid
• Electric Air Heaters: using electricity.

Product / Fines Recovery System Configurations:

• Cyclone Separators – Mono, Twin, Quadruple, Multi etc.
• Bag Filters – Reverse Pulse Jet, Mechanical shaking etc.
• Wet Scrubbers – Direct Contact Venturi, Adjustable Venturi, Packed scrubbers etc.

Optional Features Configurations:

• Product Cooling and Conveying Systems.
• Exhaust gases Recycling for better thermal efficiencies.
• Safety accessories like Static Jumpers, Fire Fighting Systems, Rupture Disc etc.
• Water Cooled Dryer Agitator bearing housing for high temp. operation.
• Computerized control system through PLC / DCS SCADA.

In Flash Dryer, the wet feed is dispersed into the hot air/gas stream in the drying duct through suitable feed dispersing mechanism. The material gets dried during conveying travel through the drying duct separated in the Cyclones or bag filters. Some applications require preconditioning of feed by back-mixing of a dry product or mixing with oversize particles tapped through particle classifiers installed at suitable locations on the drying duct. AVM offers Customized Flash Drying Systems with a variety of Configurations.

Material Feeding Configurations:

• Mono Screw Feeder.
• Double Screw Feeder.
• Double Paddle Mixer for back mixing of dry product.
• Feed Bin with Lump Breaker.
• Volumetric feeder.
• Rotary Feeder.

Feed Disperser Configurations:

• Sling Fan.
• Cage Mill.
• Mechanical Scatterer.
• Chain Slinger.
• Ventury Feeder.
• Combinations of above

Oversize Particle Classifier Configurations:

• Deflector Hood.
• Ring Classifier.

Air Heating System Configurations:

• Direct Fired / Indirect Fired Air Heaters: using Liquid / Gaseous Fuels.
• Direct / Indirect Fired Air Heaters: using Solid Fuels, Agro Waste, Saw Dust, Rice Husk, Coal, Briquette etc.
• Indirect Air Heaters: Using Steam / Hot Oil / Thermic Fluid
• Electric Air Heaters: using electricity.

Product / Fines Recovery System Configurations:

• Cyclone Separators – Mono, Twin, Quadruple, Multi etc.
• Bag Filters – Reverse Pulse Jet, Mechanical shaking etc.
• Wet Scrubbers – Direct Contact Venturi, Adjustable Venturi, Packed scrubbers etc.

Optional Features Configurations:

• Product Cooling and Conveying Systems.
• Exhaust gases Recycling for better thermal efficiencies.
• Safety accessories like Static Jumpers, Fire Fighting Systems, Rupture Disc etc.
• Computerized control system through PLC / DCS SCADA.

A Cage Mill Flash Dryer is a specialized industrial drying equipment used for drying materials in powder or slurry form. It combines the principles of both cage mills and flash dryers, providing efficient drying, grinding, and de-agglomeration of materials in one process.

Spin Flash Dryer is widely used in the industry for converting Wet Cake material to powder, . The advantages of Flash drying  system are consistent product quality, with better control of product parameters like product moisture, bulk density, particle size etc. AVM offers Customized Flash Drying Systems with a variety of Configurations.Specifications: Capacity: 100 kg/h to 10,000 kg/h water evaporation. Max Inlet Temperature: Upto 1400 deg C The combination of Systems Configurations:Cage Mill / Feed Disperser / Agitated Spin Flash type dryer for drying of Food, Pharma, Starch, Agro, Chemical products. The wet  cake from centrifuge / Filter Press / Decanter is to be fed into the Dryer feed bin. The wet feed material comes in contact with hot drying air and travels through  drying duct and gets dried. The dried material gets conveyed to cyclone separator & discharged through rotary airlock valve.